Re S.p.A. – Solutions for web control and print inspection

An absolute novelty for Re S.p.A.’s web guiding systems family is the SU.11 ultrasonic sensor (Source: Re S.p.A.)

ITALY • At the Print4All event, Re SpA is organizing to present itself as one of the key players among the supplier of quality systems for the web alignment, web tension control and printing inspection and viewing. (Hall 18 Stand D19-C20)

An absolute novelty for the web guiding systems family is the SU.11 ultrasonic sensor offering a measuring range of 6 mm (0.24”) and a 0,02 mm (0.0008”) of resolution. The sensor can be provided both in the standard version, to be used with Re web guiding systems, or in the SU.11 MLO version to be used with a common PLC thanks to the tension and current outputs.


For the wide format webs, especially for the blown film extrusion, the company will show the WG2003, a compact system with automatic sensor holder and the web width reading, a necessary requirement for the blown film extrusion industry.

For web tension control applications, Re SpA will display the Combiflex HP brake, the Extreme XT10 pneumatic brake for important torques, and the Extreme XT7 lower torques. Moreover, the company will show a wide range of load cells and tension controllers for any kind of application. Finally, a wide portfolio of expanding shafts and mechanical and pneumo-mechanical core chucks for a safe clamping of even very big and heavy reels.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may also be interested in: